Har tappat bort min manual till hanna CA nån som kan skriva ner hur man gör ?

Sent from my Galaxy Nexus using Tapatalk 2

- Turn the meter on by pressing the button, all segments will be displayed. When the display shows "Add", "C.1" with "Press" blinking, the meter is ready.

- Add 1ml of Reagent A to the cuvette using the syringe with the white plunger. Use the dropper to fill thecuvette to the 10 ml marl with deionized water and replace the cap. Invert 3-5 times to mix.

- Place the cuvette into the meter, close the lid and press the button. When the display shows "Add", "C.2" with "Press" blinking the meter is zeroed.

- Remove the cuvette from the meter and unscrew the cap. Add 0,1 ml of sample to the cuvetteusing the syringe with the green plunger.

Note: Foe improved accuracy fill the syringe to the 1 ml mark and dispense 0,1 ml by lowering the plunger to the 0,9 ml mark.

- Add 1 packet of Reagent B. Replace the cap and shake vigorously for 15 seconds or untill the powder is completely dissolved. Allow airbubbles to dissipate for 15 seconds before taking a reading.

- Place the cuvette back into the meter and close the lid. Press the button. The meter displays concentration in ppm of calcium.

(The meter automatically turns off after 10 minutes)

tackar så mycket.

opps.... jag glömde SMSa numret till min bror va?